The A40640 module is truly the first classic module in the history of dilde laser's innovations for large-scale applications. Its extremely lightweight design and all-around performance for a wide range of engraving and cutting applications provides excellent performance in metal engraving, wood engraving and cutting, acrylic engraving, etc. The reliability and longevity of the module is greatly enhanced by the A40640 II, which has been designed to provide the most reliable and long-lasting module available. The A40640 II greatly enhances the reliability and longevity of the module, and is designed to be the ultimate in silence, anti-static, temperature control, performance balance and ease of use. =====Application Examples===== ====Wood Engraving ==== {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A40640img.jpg}} https://www.facebook.com/photo/?fbid=1509924309524202&set=pcb.3268776093367444 Basswood photo a40640, neje max {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A406403432s.jpg}} https://www.facebook.com/photo/?fbid=10222754855039862&set=gm.3295272114051175&idorvanity=2737185006526558 Did another 3D illusion engraving from a purchased design. This one is 8” X 10” on 1/2 inch solid Maple wood. A40640, 2000 mm/m 40% power. {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A40640344.jpg}} https://www.facebook.com/photo/?fbid=158016823876022&set=gm.3450484065196645&idorvanity=2737185006526558 ====Wood Cutting==== {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/20mm.gif}} {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/plywood.gif}} {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A4064034.png}} https://www.facebook.com/photo/?fbid=10229359243359174&set=pcb.3760667277511654 4 layers plywood, size 250×250 mm, quarz mechanism. Laser - Neje 2 Max whit A40640 module. {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/hanmo.png}} https://www.facebook.com/photo/?fbid=10223826034271146&set=pcb.3091315694446819 The A40640 has been fitted to my MPCNC and is working incredibly well for my application needs. Don't see many using it for my application in the construction of giant scale RC aircraft. {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A406405.png}} {{https://www.facebook.com/groups/2737185006526558/user/100000152169351/| from Димитър Палански}} {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A4064023rc.png}} https://www.youtube.com/watch?v=tGGNg63Ntzc&t=199s A40640 laser module to cut and engrave | I built RC airplane with this ====Photo Engraving==== {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A4064034s.jpg}} https://www.facebook.com/photo/?fbid=2378201085681661&set=pcb.3503723403206044 It's unbelievable what u can do with neje a40640 module ❤️ {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A40650.png}} https://www.facebook.com/100004753779137/videos/pcb.3786801458231569/1502786293931811 Old neje laser master 2 max with A40640 module, still doing pretty well after all these years All are burnt with same settings, speed 2000, 20% power, Stucki mode. {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/paina4s.jpg}} https://www.facebook.com/photo/?fbid=209613958185067&set=pcb.3374265476151838 Decided to try some tile work, these are my test results from day 1, think these will be awesome with some more fine tuning, also thinking the a40640 may be a little powerful this stuff ==== Metal Engraving==== {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A4064044.jpg}} {{https://www.facebook.com/groups/2737185006526558/user/100001385469689/|from Alexis Phipps}} Here comes the laser-etched stainless steel bracelet! Max 4 & A40640 600/70%/2 passes {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/a40640st.png}} https://www.facebook.com/photo/?fbid=2090673851105260&set=pcb.3164539797124408 I did some tests on stainless steel. With module A40640, and comes out not bad at all. 1. On Spatula blade. 2. On an Arcos knife blade. 3. On a cutting knife blade. Distance 21 mm, speed 600, 100% power. I also tried on Zippo lighter, 0 results. ====Stainless Steel Engraving ==== {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A40640343.png}} Stainless Steel Engraving {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/steela4.jpg}} https://www.facebook.com/photo/?fbid=5539845769359844&set=gm.3167431356835252&idorvanity=2737185006526558 Neje A40640 on steinless steel, no coating, size A5 {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A4064sdf054.png}} https://www.facebook.com/1497729072/videos/990159728557695/?idorvanity=2737185006526558 Painted Glass Enraving {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/MDFA40.png}} https://www.facebook.com/photo/?fbid=279769061017090&set=pcb.3162398900671831 mdf cut https://www.youtube.com/watch?v=QR6vtpLj0R0 {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A40le.jpg}} https://www.facebook.com/photo/?fbid=10158582910011471&set=pcb.3216449251933462 This was done with my A40630 moudule my A40640 module came today and that thing cut Uber fast can’t wait to try the black acrylic. This is called laserette a company name JDS here in the Us sells it fir $3.94 fir a 12x24 sheet which can make it . Hand sewed now I should have engraved it first lol 😂 I was so excited to sew it together patches want be a problem {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/Acrylic.gif}} =====Features ===== {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/max4/A406402.jpg}} {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/E80/A40640_focus.jpg}} Variable multi-focal length cutter head design NEJE A40640 is currently the laser module with the best engraving efficiency. The pulse density and knife shape design are especially suitable for high-efficiency engraving. Compared with the same type of laser module, the engraving efficiency is 200% higher. Even under low light conditions, you can hear the focus plasma The sound of hitting, A40640 is also capable of cutting tasks within 20mm, and has a more efficient cutting ability within 8mm. The NEJE A40640 module is an adjustable focus module. For the consistency of testing, the NEJE factory adjusts the module to 55-70mm focal length by default. This focal length is not the best carving and cutting focal. This focal length is generally not commonly used. When you are suitable for the first use of the product, it is recommended to use a flat-head screw to adjust the focal length to about 10-20mm, which is 10-20mm away from the light baffle. This focal length has a very high focal power density and can directly engrave grayscale stainless steel images\ gray-black stone and other hard materials, NEJE A40640 can directly engrave 3D hardwood and other materials, and does not require air assistance, due to the high energy density design, A40640 can directly vaporize general wooden materials during the engraving and cutting process, so it is also unecessary to add air assist. ===== Air assist ===== **When do you need air assist** Air-assisted engraving or cutting can only be used for engraving or cutting that produces more carbonized substances. Generally, the depth of engraving is less than 1mm, and the cutting of plywood less than 2mm does not require air assist. A small fan can be used to blow off the smoke generated by the engraving. Air assist is not recommended when engraving images, and adding air assist at this time will destroy image details. **What kind of air pump is suitable for cutting** The main meaning of air assist is to blow off the carbonized material produced by cutting, and the general oxygener and electromagnetic inflator have almost no meaning. only the pressure of the oil pump and air compressor (0.4-1.5mPa) has the effect of blowing away the carbonized material. but it should be noted that the air of the oil pump contains oil and cannot be directly used for the air-assisted module of the closed cavity, otherwise the oil will contaminate the lens, resulting in power drop or damage to the lens. The air pressure of the air compressor can be used for a short time with the closed cavity, but When used for a long time, the water-containing gas will contaminate the lens, cause the power to drop, and even damage the lens. =====Database===== plywood 2mm cut ------------ 480mm/min,S1000, 1 pass plywood 3mm cut ------------ 420mm/min,S1000, 1 pass plywood 4mm cut ------------ 360mm/min,S1000, 1 pass plywood 5mm cut ------------ 240mm/min,S1000，1 pass plywood 8mm cut ------------ 120mm/min,S1000，1 pass plywood 18mm cut ------------ 120mm/min,S1000，3 pass birch ply 3mm ------------ 480mm/min,S1000, 1 pass MDF board 3mm cut ------------ 120mm/min,S1000, 1 pass MDF board 5mm cut ------------ 120mm/min,S1000, 2 pass MDF board 8mm cut ------------ 120mm/min,S1000, 3 pass black acrylic plate 3mm cut ------------ 120mm/min,S1000, 1 pass black acrylic plate 5mm cut ------------ 120mm/min,S1000, 2 pass ===== Specification ===== Radiator Size: 40 x 50 x 60 mm Weight: 204g Speed of the Fan: 10600RPM(Double ball bearing) Interface: PH2.0 4Pin Drive Design: Built-in Input: 12V 4A Optical Power: 12W Wavelength: 450nm Laser Class: Class 4 Number of Diodes: 2 Light Source: 2xLD+fiber + FAC Tech + C-Lens PWM Input: VPP(3.3-12V), Recomend 1KHz Quiet Design: Drive the built-in control ic, judge the working state and adjust the fan work. Max Cutting & Carving Depth: 20mm (The data is tested by NEJE users, and it needs to be done under more accurate focusing and adding correct and certain strength of air assist.) Brushed Stainless Steel Carving: Yes Mirror Stainless Steel Carving: Yes ===== Interface ===== {{:1_89_.jpg}} 12V: Power positive . GND: Power ground or power negative. TTL/PWM: TTL = PWM, input 3.3V~12V to turn on laser module, conect to GND to turn off laser module. Temperature: do not connect, please ignore. Connect 12V and GND pin to 12V power, ensure the power adapter is sufficient, 5A is recommended. Connect TTL/PWM pin to your control board PWM output pin. ===== Test Board ===== [[https://neje.wiki/doku.php?id=mtestboard_1|NEJE Moudle Switch and Test Board]] ===== Maintenance ===== Although this module adopts internal air-assisted design, long-term use may not prevent dust or a small amount of smoke from affecting the lens. It is recommended to clean the lens with a clean cotton swab. Dust or smoke may overheat the lens and cause the lens to burn out. Re-acquire the lens Will delay your use. {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/NEJE_3_Max/by.png}} ===== FAQs ===== {{https://neje99.com/faq/inferior-power-supply-leads-to-the-problem-of-laser-power-drop.html|Inferior power supply leads to the problem of laser power drop!}} {{https://neje99.com/faq/how-to-test-my-laser-module.html|How to test my laser module ?}} {{https://neje99.com/faq/about-pwm-signal-specification.html|About PWM signal specification.}} {{https://neje99.com/faq/how-to-distinguish-my-module-type.html|How to distinguish my laser module types ?}} {{https://neje99.com/faq/how-to-make-laser-module-work-with-your-control-board.html|How to make laser module work with your control board ?}} {{https://neje99.com/faq/how-to-check-my-cable-connection-is-properly.html|How to check my cable connection is properly}} For more information, please search in **[[https://neje99.com|NEJE Document]]** =====Others===== {{https://nejetool.oss-us-west-1.aliyuncs.com/wiki/A406404.jpg}}