Control chip: 32bit

Memory capacity: 256mb

MEMS: built in

Seamless reset technology: built in

USB: USB2.0

Bluetooth: built in

Input: 12V or 24V

Supported control software: NEJE series control software/APP, Lightburn, LaserGRBL.

Supports NEJE's brand-new complex process control software and wireless control operations.

Optimizes numerous GRBL native firmware bugs.

Provides lifetime free firmware upgrade services.

Supports wireless real-time control with Lightburn and LaserGRBL.

Enables wireless or USB content transfer with Lightburn and LaserGRBL software for “REC” offline work.

Built-in advanced seamless reset function, no need for additional reset buttons, easy wiring. 2-year free warranty.

Independent Z-axis for rotary axis expansion(Requires a motor driver adapter board).

Supports complex processes and safety expansions such as M8, M7, and Door.

It can be used for DIY any X, Y, Z step motor-driven mechanical structure, with voltage support for 12-24V input.

“One Key Start”: After the NEJE software transfers data to the device, the device's multi-function button can directly complete the positioning and startup of complex processes. Long press switches between NEJE and GRBL modes, a single press is for positioning, double press starts engraving, and a single press during the work process pauses the operation.

---

Motion Parameters NEJE device models have motion parameters set by default. For novices, you do not need to change them. For experienced users, you can optimize the X and Y axis acceleration according to the actual situation to adapt your project in a more efficient way. This requires certain mechanical knowledge and depends on the module you adapt. Don't worry, if you cannot find the original parameters after changing them, you can solve it by re-flashing the firmware.

---

M8,M7,Door The NEJE series devices support M8, M7, and Door function expansion. We usually use M8 to control automatic air assist, which is used to assist in cutting or protect the lens. It can automatically control the gas supply when the equipment starts and ends. You can connect M8 through a relay switch or electromagnetic air valve. The M7 function can be configured in the lightburn software and NEJE software to check whether it is enabled. Usually, we use M7 to expand the automatic smoke discharging system, and we usually use relay modules to control the power supply of smoke discharging equipment. The Door function mainly expands safety functions. NEJE engineers have designed expansion functions for flame sensors, emergency stops, and safety doors. The expansion of the Door function can help prevent safety issues to a certain extent By expanding the interface, you can obtain a more automated device that greatly improves operational efficiency and experience in the actual operation process.

NEJE has designed relay modules to support the control of 12-250V electrical equipment and gas valve modules. The modules are all supported by M8 or M7 interface control. You can decide whether to turn on auxiliary functions at each working level through lightburn software or NEJE software. You can turn on auxiliary functions a few seconds before each start of work.

Please select the corresponding voltage air valve according to the input power supply voltage. otherwise the functions of the main board M8 and M7 may be damaged！

Compatible Modules

All other NEJE 12V modules and 24V modules are supported.

Independent Z-axis expansion

NEJE 5 adopts independent Z-axis expansion. You don’t need to transform the Y-axis into a rotation axis. You can directly lock the Y-axis and expand the rotation axis through the Z-axis. If you are a professional, you can even expand automatic material change.