NEJE 5 mini laser engraver for wood, metal, glass, stainless steel, stone, photo.

Specification

Equipment size: X=380mm Y=310mm Z=130mm
Structural material: CNC aluminum
Equipment weight: 1500g
Working area: X=170mm Y=180mm

Power input: 12V or 24V
Laser interface: PH2.0 4pin+2pin

Motion Control System: NEJE 5 Motion Control System.
Supported control software: NEJE series control software, Lightburn, LaserGRBL.

Features

Ready to use out of the box

Ready to use right out of the box.

It can be placed directly on a tabletop or fixed on a flat surface for better motion stability. If you need to use it for cutting, you can place a metal plate under the honeycomb bottom plate to prevent the laser from damaging the tabletop.

Quick focusing

Quick focusing up and down, strong locking module, stable and safe.

High-strength precision CNC structure

High-strength CNC metal structure, more stable image quality.

Mechanical maintenance

The design of the simple adjustable gap and tension components ensures the continuous precision and reliability of the mechanical performance.

Unlimited expansion of the working area

3 ways to expand the area:

a.Adjust the X-axis screw to increase the height by about 30mm

b.Purchase a modification kit to replace the Y-axis rail, or replace the X and Y-axis rails to obtain a maximum working area of X=290mm, Y=430mm

c.Prepare a standard 2040 track less than 2 meters long, make a set of wires and matching length of synchronous belt with steel wire core, and easily transform it into a super large working area equipment, with the maximum working area reaching X=290mm, Y=1820mm.

The default area of NEJE 5 is 170*170mm. After changing the hardware area by expanding the track, you need to modify the area parameters of the firmware, software, and device.