The NEJE E40Ⅱ module, based on the first-generation E40, is specifically designed as a fixed-focus module with an output optical power greater than 10W to meet the needs of both wood engraving and cutting. The E40Ⅱ utilizes sophisticated lens compression technology, and compared to the previous E40, the E40Ⅱ has an increased focal length to adapt to thicker wood cutting while retaining fine engraving capabilities. The E40 module comes with a built-in air protection feature, and without the need for additional air assistance, the module's own cooling system can adequately protect the lens. The E40Ⅱ is also equipped with both cavity-style and needle-style air assistance forms; the needle-style air assistance is not particular about the air source and can be virtually maintenance-free with common woodwork air sources. Of course, the capabilities of the E40Ⅱ extend far beyond woodworking; a multitude of other materials can be quickly engraved and cut.

Application Examples

nejetool.oss-us-west-1.aliyuncs.com_wiki_e40090.jpg https://www.facebook.com/photo/?fbid=10234377720083140&set=gm.3732646770313705&idorvanity=2737185006526558 Canvas with silver & black paint Neje 3 with E40

E40

from Alexis Phipps First time trying to engrave ceramic tiles, spray black. 3000/50%/E40


https://www.facebook.com/photo/?fbid=10229243996938234&set=pcb.3793689787542736 My first test on denim with my new E40 module 🤩🤩 I used S:500/P:77 with e40 laser module.


nejetool.oss-us-west-1.aliyuncs.com_wiki_e800.jpg

from Alexis Phipps Slate Coaster 3000/30% NEJE MAX 4 & E40


nejetool.oss-us-west-1.aliyuncs.com_wiki_e40wr.jpg https://www.facebook.com/photo/?fbid=616102010294956&set=pcb.3309456652632721 Carte du monde en bois 3D réalisé avec un Neje master 2s Max extensions 1030×810 module E40 180x 110 cm

Features

nejetool.oss-us-west-1.aliyuncs.com_wiki_max4_e4023.jpg

Database

plywood 2mm cut ———— 480mm/min,S1000, 1 pass

plywood 3mm cut ———— 420mm/min,S1000, 1 pass

plywood 4mm cut ———— 360mm/min,S1000, 1 pass

plywood 5mm cut ———— 240mm/min,S1000,1 pass

plywood 8mm cut ———— 120mm/min,S1000,1 pass

plywood 18mm cut ———— 120mm/min,S1000,3 pass

birch ply 3mm ———— 480mm/min,S1000, 1 pass

MDF board 3mm cut ———— 120mm/min,S1000, 1 pass

MDF board 5mm cut ———— 120mm/min,S1000, 2 pass

MDF board 8mm cut ———— 120mm/min,S1000, 3 pass

black acrylic plate 3mm cut ———— 120mm/min,S1000, 1 pass

black acrylic plate 5mm cut ———— 120mm/min,S1000, 2 pass

Test Board

Others

nejetool.oss-us-west-1.aliyuncs.com_wiki_e404.jpg

  • Show pagesource